WINKING  EPOXY   ADHESIVE   SYSTEM

GENERAL  DESCRIPTION
 
This is high reliabilities, suit for adhesive in high quality electric insulating Components; good handling viscosity potting system acceptable too, with Excellent thermal and heat resistance, and electrical insulating properties.

PROPERTIES  OF  UNCURED  MATERIAL:      (@25℃)

1.Appearance:                           Black dense Liquid
2.Density:                                     1.5
3.Shelf  Life:                          at  5℃    at  25℃   at  40℃
                                            6Months    3 Months   2 Weeks
4.Gel  Time:                            100℃/40mins      120℃/20mins
5.Curing  Time:                         100℃/2Hour       120℃/1Hours

PROPERTIES OF CURED : (Curing  Condition: 120℃/2 Hrs)

Hardness                                                            Shore D           91     ASTM  D2240
H.  D.  T.                                                              ℃               155     ASTM  D684
Moisture  absorption                                  @100℃/1 Hrs    0.27     ASTM  D570
Glass transition temperature                                 ℃              140     ASTM  D256
Thermal shock (no cracking)                        10 cycles   -55 to130℃  ASTM  D1674
Dielectric contant                                         @25℃, 1KHz      4.3     ASTM  D150
Cofficient of linear
Themal expansion                                           cm/℃        4.6X10^-5    ASTM  D1674
Thermal  conductivity                               cal/cm.sec℃   7.6X10^-4    ASTM  D1674
Linermal shremkage                                                 ％              0.2     ASTM  D2566
 
                                                 
NOTE:
*Keep in cool low temperature(@5℃ or below) avoid moisture and sun shine directiy, to keep long using.

*Avoid conlact of the skin ,eyes and clothes,in case of contact,just wash wish soap and water immediately.

包装规格:  1 KG/罐     12KG/箱

具体应用如下：